Alera-lighting AL1072 - Installed Daylight Sensors Guide Uživatelský manuál stáhnout pdf (Strana 4)

EXAMPLE OF A PRIVATE OFFICE WITH

SUSPENDED LUMINAIRE WITH SENSOR

Suspended Alera Lighting Luminaire

12-18" Suspension

8' Mounting Height from Floor to Sensor

2.5' from Floor to Desktop

Aircraft Cable Feed Cord

BALLAST

EDUMK7

Universal Voltage

Electronic Dimming

Advance Mark 7 (0-

10V)

3, 4

EDULUTES

Universal Voltage

Electronic Dimming

Lutron EcoSystem

(EC5 Series)

4,7

Philips Mark 7 required with DSPL Option.

Contact factory for other compatible Philips ballasts.

Not available with all configurations; some limitations apply.

Contact factory for details.

Lutron EcoSystem series ballast required for DSL option.

Contact factory for other compatible Lutron ballasts.

OPTIONS

DSPL

Philips LuxSense

Daylight Sensor

3, 4

DSL

Lutron Daylight Sensor

(Must Specify Lutron

Dimming Ballast)

4, 7

STEP 3 PLACE ORDER

Example shown below is Curv Radial Baffle product.

For additional product availability, see back cover or contact Alera Lighting for additional details.

STEP 4 DESIGN ROOM

Examples below show installed sensor locations. Products will be wired to your specifications.

Single 4', 8' or 12'

* Fixture with Sensor.

Row of two or more 4', 8' or 12'

* Fixtures with Sensors where Sensor is placed at row end.

Row of two or more 4', 8' or 12'

* Fixtures with Sensors where Sensor is placed within row.

*Available lengths vary by product family.

Short rows typically require a single feed where control wiring is carried through the

luminaires via quick-connect wiring to dramatically reduce complexity and on-site wiring

errors. Power feed wires are also handled via the installer-friendly Quick-Connect method.

QUICK-CONNECT IN-ROW CONTROL AND FIXTURE WIRING

Product becomes an element of the EcoSystem family and the installed sensor is commissioned using Lutron's

proprietary interfaces. Ballast and sensor are pre-installed by Alera to facilitate on-site simplicity of sensor installation

and connection to ballast(s). For details, see pages 6 and 7 of this brochure.

DSL OPTION LUTRON ECOSYSTEM® SENSOR

System is pre-commissioned by Philips and assumes 45fc out-of-the-box. For on-site adjustments, if desired, simply

twist sensor to set at new level. For details, see page 9 of this brochure.

DSPL OPTION PHILIPS LUXSENSE

STEP 5 EASY INSTALL

Sensors arrive pre-installed

5 STEPS TO DAYLIGHTING SUCCESS

SHOWN WITH PLANK

1 2 3 4 5 6 7

Komentáře k této Příručce

Žádné komentáře

Alera-lighting AL1072 - Installed Daylight Sensors Guide Uživatelský manuál Strana 4

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Alera-lighting AL1072 - Installed Daylight Sensors Guide